All applications583

Find your application

583 applications

Open full catalog

Browse applications by category or open the full catalog.

QMS for Electronics Manufacturing · Available now

Electronics QMS from board inspection to CAPA.

QMS for Electronics Manufacturing coordinates planned inspections, their individual check results and evidence, and the quality decision on an inspected subject. An inspector works the checks and submits the inspection for review.

  • No per-user fees
  • Manual work is free
  • Configure it in Proto
OverviewInspection queue
QMS for Electronics Manufacturing · Inspections

Inspection queue

Inspections in one list

New inspection
Inspections in view
6
Incoming
2
In process
2
Final
1
Incoming2
Power board lot 42INS-94320
20 Nov
Assembly bench 7INS-57702
09 Nov
Add
In process2
Controller PCB revision DINS-97061
06 Nov
Sensor board lot 29INS-59654
09 Nov
Add
Final1
Connector J4 batch 118INS-42921
12 Nov
Add
Service1
Board serial 01884INS-95535
13 Nov
Add
Power board lot 42Inspections · INS-94320
Incoming
Scheduled at20 Nov
StatusPlanned
Assigned toLena Okafor
Review failed scopeINS-94320 · Power board lot 42

Quality Reviewer decides Accepted or Rejected after checking the failed evidence.

Waiting for Quality Reviewer
ApproveReturn
Example screen with sample data
Tables, ready to use
12
Saved views
15
Roles with set permissions
6
Reports and dashboards
8
Features

Keep quality work in view

Every feature works on the same records. Pick one to see the screen your team works in.

Inspections

Plan inspections, capture check evidence and give reviewers the complete decision record.

  • The inspection header
  • Check detail
  • Review
  • Inspections
  • Inspection checks
  • People
  • Nonconformances
Explore inspections
OverviewInspection review inbox
QMS for Electronics Manufacturing · Inspections

Inspection review inbox

Approval conditions

New
Inspection numberSubject referenceInspection typeScheduled atStatusAssigned to
INS-70709Power board lot 42Incoming16 NovReviewIvy Mercer
INS-98894Controller PCB revision DIn process13 NovReviewLena Okafor
INS-14236Connector J4 batch 118Final23 NovReviewLena Okafor
INS-23097Board serial 01884Service17 NovReviewRafael Nwosu
INS-76222Assembly bench 7Incoming24 NovReviewMateo Park
6 of 6 records
Power board lot 42Inspections · INS-70709
Incoming
Scheduled at16 Nov
StatusReview
Assigned toIvy Mercer
Example screen with sample data
Process

Follow a case from inspection to correction

Inspection to corrective action ships ready to use. 3 steps need a named approval before the work moves on: Review failed scope (Quality Reviewer), Approve corrective action (Quality Manager) and Verify effectiveness (Independent Reviewer).

Drag a card to another stage, or focus it and use the arrow keys. It updates to match the stage.

  1. Plan inspection

    Assign the inspected subject and schedule.

    Power board lot 42INS-94320 · Quality Manager
    Plan inspectionBy Quality Manager
  2. Record check evidence

    Capture each requirement, result and observation.

    Power board lot 42INS-94320 · Inspector
    Record check evidenceBy Inspector
  3. Contain nonconformance

    Link failed scope to its inspection when review begins.

    Power board lot 42INS-94320 · Quality Reviewer
    Contain nonconformanceBy Quality Reviewer
  4. Review failed scope

    A quality reviewer decides the inspection outcome from the recorded checks.

    Power board lot 42INS-94320 · Quality Reviewer
    Review failed scopeBy Quality Reviewer
    ApprovalQuality Reviewer decides Accepted or Rejected after checking the failed evidence.
  5. Approve corrective action

    The quality manager accepts the plan before implementation.

    Power board lot 42INS-94320 · Quality Manager
    Approve corrective actionBy Quality Manager
    ApprovalQuality Manager approves the action plan and due work.
  6. Verify effectiveness

    An independent reviewer accepts the evidence before closure.

    Power board lot 42INS-94320 · Independent Reviewer
    Verify effectivenessBy Independent Reviewer
    ApprovalIndependent Reviewer accepts effectiveness before closure.
Inside a record

Bring source evidence into the case

Open any inspection to see its board defects, the roles that work on it, its process stages and its approvals on one page.

  1. 1
    Record details

    Scheduled at, Status and Assigned to.

  2. 2
    Board defects

    Each line is linked to this inspection.

  3. 3
    Who works on it

    Admin, Inspector and Quality Reviewer, each with their own permissions.

  4. 4
    Process stages

    Plan inspection and Record check evidence, with the role that acts.

  5. 5
    Approvals

    Review failed scope and Approve corrective action, with who decides.

Inspection queuePower board lot 42
QMS for Electronics Manufacturing · Inspections

Power board lot 42

Incoming

Log activity
1
Record details
Scheduled at20 Nov
StatusPlanned
Assigned toLena Okafor
2
Board defects

Power board lot 42

Operational recordBoard serialRevision
First article, controller PCB revision DPCB-26-01884Rev A
Rework inspection, board serial 01884PCB-26-01885Rev B
ESD check, assembly bench 7PCB-26-01902Rev C
Board defects
6
3

Who works on it

  • AdminManage Users, People
  • InspectorManage Inspections, inspection checks, ESD checks, board defects
  • Quality ReviewerManage Nonconformances, board defects, ESD checks
4

Process stages

  • Plan inspectionQuality Manager, Inspector
  • Record check evidenceInspector
5

Approvals

  • Review failed scopeQuality Reviewer
    Approved
  • Approve corrective actionQuality Manager
    Waiting
Example screen with sample data
Approvals

Put decisions with the right reviewer

OverviewApprovals
QMS for Electronics Manufacturing · Overview

Approvals

Signed in as Quality Reviewer

Waiting for you

4 To review1 Overdue2 Decided todayOnly mine
0 selectedApproveReturn
  • INS-70709Power board lot 42
    Requested by Ivy Mercer
    Incoming1dActions
  • INS-98894Controller PCB revision D
    Requested by Lena Okafor
    In process3dActions
  • INS-14236Connector J4 batch 118
    Requested by Lena Okafor
    Final2dActions
  • INS-23097Board serial 01884
    Requested by Rafael Nwosu
    Service6dActions

Who approves what

DecisionApprover
Review failed scopeA quality reviewer decides the inspection outcome from the recorded checks.Quality Reviewer
Approve corrective actionThe quality manager accepts the plan before implementation.Quality Manager
Verify effectivenessAn independent reviewer accepts the evidence before closure.Independent Reviewer
Approve InspectionsQuality Reviewer
Approve corrective actionsIndependent Reviewer
Approve corrective actions, controlled documentsQuality Manager
6 approval rules · set per role in Proto
Example screen with sample data
Roles

A workspace for each role

Everyone opens QMS for Electronics Manufacturing to the work that is theirs. Pick a role to see what it starts with.

Admin

Configures access and maintains the People and Users directory for the quality team.

  • Manage Users, People
  • View Inspections, inspection checks, Nonconformances, corrective actions, Audits, audit findings, controlled documents, training acknowledgments, ESD checks, board defects
Reports

Read the patterns behind quality work

Read quality workload and failure patterns from the underlying records.

Overview
QMS for Electronics Manufacturing · Overview

QMS for Electronics Manufacturing dashboard

This quarter

Controlled documents in view
6
Draft
6

Inspections by status

How far records got this quarter

StageReachedStep
Planned31
In progress929%
Review333%
Accepted133%

Number of inspections by status

Sample counts per stage

0
-20Planned
-50In progress
-20Review
-50Accepted
-60Rejected
Example screen with sample data
  1. 01Inspection status by type

    Which Incoming, in process, Final or Service inspections are still awaiting work or review?

  2. 02Failed inspection requirements

    Which requirements fail, and what observation and attachment explain each case?

  3. 03ESD readings outside limits

    Which workstation readings were marked Fail against their recorded ranges?

  4. 04Board defect dispositions

    Which defect codes and board revisions lead to Review, Rework, Scrap or Accepted?

  5. 05Nonconformance severity and state

    Which cases remain in Containment, Investigation or Disposition?

  6. 06Corrective action due work

    Which owner has an action due while it is still active?

  7. 07Audit findings by severity

    Which findings and owners sit under each audit?

  8. 08Document acknowledgment history

    Which people acknowledged a particular controlled document version, and when?

Controls

Keep the decision trail intact

Each stage of inspection to corrective action names the role that acts and the status it records, so a change is never anonymous.

OverviewInspection to corrective action
QMS for Electronics Manufacturing · Process

Inspection to corrective action

Each stage, the role that acts and the status it records

Process stages
10
Approval steps
3
Roles involved
5
Tables touched
3
Record check evidence
Inspector
StatusPlanned → in progress
RecordsInspections
Submit inspection
Inspector
StatusIn progress → Review
Review failed scopeApproval
Quality Reviewer
StatusReview → Accepted
RecordsInspections
Inspection to corrective action
  1. Start
    Record check evidencePlanned → in progress
    Inspections
  2. Step
    Submit inspectionIn progress → Review
    Inspector
  3. Approval
    Review failed scopeReview → Accepted
    Inspections
  4. Step
    Investigate causeContainment → Investigation
    Corrective actions
  5. Approval
    Approve corrective actionPlanned → Approved
    Corrective actions
Example screen with sample data
AI agent

Get help preparing the next review

Use Proto to prepare quality work and point people to the records behind each decision.

It can

  • Inspector: Find assigned inspections and list their linked checks before submission.
  • Quality Reviewer: Summarize failed check evidence and identify the linked inspection for a review decision.
  • Corrective Action Owner: Gather the nonconformance, root cause, action and due date for a status review.
  • Quality Manager: Prepare a queue of open audit findings and document versions awaiting review.

Stays with a person

  • Proto can help prepare and locate information.
  • The named reviewer still decides whether an inspection is Accepted or Rejected, whether a board defect is Rework, Scrap or Accepted, and whether a corrective action is effective.
  • Confirm the record and evidence before approving any action.
Integrations

Connects to the tools you use

Set up connections through ERP.AI and Proto workflows, with every change logged.

  • QMS for Electronics Manufacturing
  • Production records
  • Measurement capture
  • Document storage
  • Identity
Data model

Your data, in tables you can change

Every record lives in a table you can see, extend and export. Add fields or whole tables in Proto.

Browse all 12 tables
12tables
  • Inspections4
  • Board defects4
  • ESD checks4
  • Nonconformances6
  • Corrective actions5
  • Audits and documents6
Implementation

Roll out one team at a time

Start with one team and one process, then add the rest once the basics are running.

  1. Define the quality case

    Agree inspection subject references, inspection types, requirement wording, evidence rules and named reviewers. Enter People and Users before assigning work.

  2. Rehearse inspection decisions

    Create a planned inspection with linked checks, submit it for review and verify both Accepted and Rejected outcomes. Trace a failed check into a linked nonconformance.

  3. Add electronics evidence

    Capture a board defect with serial, revision and reference designator. Capture ESD Pass and Fail readings with the workstation, measurement and limits. Review each against its operational inspection.

  4. Run corrective action

    Assign an owner to the linked corrective action, record root cause and proposed action, obtain plan approval and test independent effectiveness review.

  5. Extend recurring work

    Add an audit with a finding, a controlled document version and a person’s training acknowledgment. Check the reports against their source records.

Pricing

$0per user

The base account and everyday work in the ERP.AI app are free, for every user.

  • No per-user or per-seat fees
  • Viewing, editing, approving and exporting records in the app is free
  • Pay only for machine work: API calls, imports, workflows and AI agents
  • Prepaid credits from $5. Purchased credits never expire

Pricing details

Machine work rate card Included per $1

Machine work rate card
UsagePer $1
Record reads (list, filter, get)20,000
Search or aggregate queries4,000
Record writes4,000
Imported or synced records200,000
Workflow runs2,000
AI agent runs2,000
Scheduled jobs or webhooks20,000
File uploads (MB)2,000
CSV or PDF exports100
FAQ

Questions, answered

Scope, rollout and pricing for QMS for Electronics Manufacturing.

All questions
How do I get started?

Click Get started, then use Proto to configure QMS for Electronics Manufacturing for your business. Start with one inspection type, a named inspector and reviewer, and a real failed-check case that can be followed into containment.

What does an inspection contain?

An inspection records its subject, type, schedule, assignee and status. Linked checks carry requirements, observations, results and evidence for the review decision.

How does a failed check reach a reviewer?

Inspector submits the inspection at Review with its check evidence. At Review, Quality Reviewer checks failed scope and opens a linked nonconformance in Containment before deciding the inspection outcome.

Can we record board defects?

Yes. Capture board serial, revision, reference designator and defect code against an inspection, then send the attributed observation for disposition.

How are ESD readings handled?

Each check records its workstation, date, resistance and lower and upper limits. An out-of-limits reading is Fail and goes to quality review; an in-limits reading remains Pass.

What connects a nonconformance to corrective action?

The corrective action references the nonconformance, which references the inspection. Its owner records root cause, action and due date. The independent reviewer examines effectiveness evidence before closure.

Who closes a corrective action?

Independent Reviewer accepts effectiveness after the owner submits the action for review. Quality Manager approves the action plan before implementation.

Can we follow audit findings?

Yes. Findings stay under their audit with requirement, observation, severity, owner and due date. Audit status and finding closure are reviewed separately.

How do document acknowledgments work?

A training acknowledgment connects a person with a controlled document and the date acknowledged. Keep document versions distinct so the record identifies what the person received.

What should we test before wider use?

Rehearse a passing inspection, a failed inspection with check evidence, an ESD Fail, a board disposition and a corrective action whose effectiveness needs independent review.

Set up QMS for Electronics Manufacturing your way.

Start free, then use Proto to change fields, steps and approvals before your team goes live.

How to get started

A personal agent for your business

Get started with Proto

Your app is selected. Download Proto, then open it with this context.

Selected appQMS for Electronics Manufacturing

Choose your computer’s platform.

Download Proto

Install Proto, then return to this panel.

Already installed? Open Proto

Free to use. Your own model provider may charge for usage.