All applications583

Find your application

583 applications

Open full catalog

Browse applications by category or open the full catalog.

QMS for Textiles and Apparel · Available now

Textile and apparel quality from fabric check to CAPA.

QMS for Textiles and Apparel coordinates inspections of textile and garment work, the checks and evidence behind each decision, and the corrective work that follows a rejection. An inspector starts a planned inspection, records requirement-level results, and submits the case for review.

  • No per-user fees
  • Manual work is free
  • Configure it in Proto
OverviewOpen inspections
Textiles and Apparel QMS · Inspections

Open inspections

Inspections in one list

New inspection
Inspections in view
6
Incoming
2
In process
2
Final
1
Incoming2
Navy twill lot NT-24INS-42321
28 Nov
Zipper lot ZP-771INS-55227
09 Nov
Add
In process2
Jacket style Harbor 6INS-76514
19 Nov
Shirt order DS-204INS-71068
25 Nov
Add
Final1
Jersey roll JR-18INS-63589
18 Nov
Add
Service1
Trouser batch LT-42INS-89343
13 Nov
Add
Navy twill lot NT-24Inspections · INS-42321
Incoming
Scheduled at28 Nov
Assigned toLin Wei
StatusPlanned
Inspection reviewINS-42321 · Navy twill lot NT-24

Quality Reviewer decides the inspection outcome.

Waiting for Quality Reviewer
ApproveReturn
Example screen with sample data
Tables, ready to use
12
Saved views
15
Roles with set permissions
7
Reports and dashboards
8
Features

Quality work in view

Every feature works on the same records. Pick one to see the screen your team works in.

Inspection planning

Assign textile and garment inspections, collect evidence and route each case to a quality decision.

  • Plan
  • Execute
  • Decide
  • Inspections
  • Inspection checks
  • Fabric inspections
  • Garment measurements
  • Nonconformances
  • People
Explore inspection planning
OverviewInspections in review
Textiles and Apparel QMS · Inspection planning

Inspections in review

Approval conditions

New
Inspection numberSubject referenceInspection typeAssigned toStatus
INS-57043Navy twill lot NT-24IncomingDaniel KimReview
INS-80622Jacket style Harbor 6In processPriya NairReview
INS-54520Jersey roll JR-18FinalNadia RahmanReview
INS-41977Trouser batch LT-42ServiceJonas BergReview
INS-99801Zipper lot ZP-771IncomingSofia PetrovReview
6 of 6 records
Navy twill lot NT-24Inspections · INS-57043
Incoming
Assigned toDaniel Kim
StatusReview
Example screen with sample data
Process

From inspection to verified correction

Inspection to verified correction ships ready to use. 3 steps need a named approval before the work moves on: Inspection review (Quality Reviewer), Action approval (Quality Manager) and Effectiveness decision (Quality Reviewer).

Drag a card to another stage, or focus it and use the arrow keys. It updates to match the stage.

  1. Inspection planning

    Assign the subject and inspector before checking begins.

    Navy twill lot NT-24INS-42321 · Inspector
    Inspection planningBy Inspector
  2. Inspection evidence

    Keep requirement results and fabric or garment detail with the inspection.

    Navy twill lot NT-24INS-42321 · Inspector
    Inspection evidenceBy Inspector
  3. Inspection review

    Quality Reviewer accepts passing scope or rejects failed scope.

    Navy twill lot NT-24INS-42321 · Quality Reviewer
    Inspection reviewBy Quality Reviewer
    ApprovalQuality Reviewer decides the inspection outcome.
  4. Containment

    Give rejected scope a linked case and severity, then name the action owner.

    Navy twill lot NT-24INS-42321 · Quality Reviewer
    ContainmentBy Quality Reviewer
  5. Action approval

    Quality Manager approves the correction plan before implementation.

    Navy twill lot NT-24INS-42321 · Quality Manager
    Action approvalBy Quality Manager
    ApprovalQuality Manager approves the planned correction.
  6. Effectiveness decision

    An independent Quality Reviewer checks whether the correction worked.

    Navy twill lot NT-24INS-42321 · Quality Reviewer
    Effectiveness decisionBy Quality Reviewer
    ApprovalQuality Reviewer independently decides whether the action can close.
Inside a record

Evidence in the right case

Open any inspection to see its fabric inspections, the roles that work on it, its process stages and its approvals on one page.

  1. 1
    Record details

    Scheduled at, Assigned to and Status.

  2. 2
    Fabric inspections

    Each line is linked to this inspection.

  3. 3
    Who works on it

    Admin, Inspector and Quality Reviewer, each with their own permissions.

  4. 4
    Process stages

    Inspection planning and Inspection start, with the role that acts.

  5. 5
    Approvals

    Inspection review and Action approval, with who decides.

Open inspectionsNavy twill lot NT-24
Textiles and Apparel QMS · Inspections

Navy twill lot NT-24

Incoming

Log activity
1
Record details
Scheduled at28 Nov
Assigned toLin Wei
StatusPlanned
2
Fabric inspections

Navy twill lot NT-24

Roll numberStyleInspected length
FI-33939Harbor field jacket510
FI-61336Ridge cotton tee480
FI-45185Solstice linen trouser810
Fabric inspections
6
Total inspected length
2,260
3

Who works on it

  • AdminManage Users, People
  • InspectorManage Inspections, inspection checks, fabric inspections…
  • Quality ReviewerManage Nonconformances
4

Process stages

  • Inspection planningInspector
  • Inspection startInspector
5

Approvals

  • Inspection reviewQuality Reviewer
    Approved
  • Action approvalQuality Manager
    Waiting
Example screen with sample data
Approvals

Decisions with clear owners

Quality Manager approves a correction plan before work; an independent Quality Reviewer tests effectiveness later.

OverviewApprovals
Textiles and Apparel QMS · Overview

Approvals

Signed in as Quality Reviewer

Waiting for you

4 To review1 Overdue2 Decided todayOnly mine
0 selectedApproveReturn
  • CD-65161Fabric shade approval procedure
    Rev 1.0Requested by Admin
    Approved0dActions
  • CD-45515Garment measurement work instruction
    Rev 1.1Requested by Admin
    Approved4dActions
  • CD-95265Needle control policy
    Rev 2.0Requested by Admin
    Approved2dActions
  • CD-88665Incoming yarn inspection plan
    Rev 2.1Requested by Admin
    Approved3dActions

Who approves what

DecisionApprover
Inspection reviewQuality Reviewer accepts passing scope or rejects failed scope.Quality Reviewer
Action approvalQuality Manager approves the correction plan before implementation.Quality Manager
Effectiveness decisionAn independent Quality Reviewer checks whether the correction worked.Quality Reviewer
Approve Inspections, corrective actionsQuality Reviewer
Approve corrective actions, controlled documentsQuality Manager
5 approval rules · set per role in Proto
Example screen with sample data
Roles

A workspace for each role

Everyone opens Textiles and Apparel QMS to the work that is theirs. Pick a role to see what it starts with.

Admin

Configures access and quality reference data while preserving named decision owners.

  • Manage Users, People
  • View Inspections, inspection checks, fabric inspections, garment measurements, Nonconformances, corrective actions, Audits, audit findings, controlled documents, training acknowledgments
Reports

Read the quality record

Read inspection outcomes, failed requirements, corrective work and audit closure from the underlying quality records.

Overview
Textiles and Apparel QMS · Overview

Textiles and Apparel QMS dashboard

This quarter

Controlled documents in view
6
Draft
6

Inspections by status

How far records got this quarter

StageReachedStep
Planned35
In progress1234%
Review325%
Accepted133%

Number of inspections by status

Sample counts per stage

200
-20Planned
-50In progress
-60Review
20Accepted
20Rejected
Example screen with sample data
  1. 01Inspection outcomes

    Which incoming, in-process and final cases were accepted or rejected?

  2. 02Check results by requirement

    Which requirements produced failed observations?

  3. 03Fabric defect evidence

    Which rolls have high defect points in the inspected length?

  4. 04Garment measurement comparison

    Where did observed measurements differ from nominal values?

  5. 05Nonconformance severity and state

    Groups cases by severity and current status.

  6. 06Corrective action due dates

    Which owners have work due or awaiting effectiveness review?

  7. 07Audit finding closure

    Which requirements still have open findings?

  8. 08Document revision and acknowledgment

    Shows document version and status with linked people and acknowledgment dates.

Controls

Keep the release trace

Each stage of inspection to verified correction names the role that acts and the status it records, so a change is never anonymous.

OverviewInspection to verified correction
Textiles and Apparel QMS · Process

Inspection to verified correction

Each stage, the role that acts and the status it records

Process stages
10
Approval steps
3
Roles involved
4
Tables touched
5
Inspection start
Inspector
StatusPlanned → in progress
RecordsInspections
Inspection submission
Inspector
StatusIn progress → Review
Inspection reviewApproval
Quality Reviewer
StatusReview → Accepted
Inspection to verified correction
  1. Start
    Inspection startPlanned → in progress
    Inspections
  2. Step
    Inspection submissionIn progress → Review
    Inspector
  3. Approval
    Inspection reviewReview → Accepted
    Quality Reviewer
  4. Step
    ContainmentOpen → Containment
    Nonconformances
  5. Step
    InvestigationContainment → Investigation
    Corrective actions
Example screen with sample data
AI agent

Ask Proto for the next case

Ask Proto to prepare quality views and explain linked evidence while people retain approval decisions.

It can

  • Inspector: Show assigned inspections approaching their scheduled date and the checks still pending.
  • Quality Reviewer: Gather a Review inspection's check results and linked fabric or garment detail for a decision.
  • Quality Manager: List planned corrective actions for approval and document revisions in Review.
  • Auditor: Show open findings with their requirements, owners and due dates.

Stays with a person

  • Proto can prepare records and context for a person, but the Quality Reviewer decides inspection disposition and effectiveness.
  • Quality Manager approves action plans and document releases.
  • Auditors decide whether finding resolution is sufficient for audit closure.
  • Give Proto the same permissions and quality instructions the team agrees for those roles.
Integrations

Connects to the tools you use

Set up connections through ERP.AI and Proto workflows, with every change logged.

  • Textiles and Apparel QMS
  • Production records
  • Supplier records
  • Laboratory evidence
  • Document storage
Data model

Your data, in tables you can change

Every record lives in a table you can see, extend and export. Add fields or whole tables in Proto.

Browse all 12 tables
12tables
  • Inspection planning6
  • Inspection checks3
  • Fabric inspections4
  • Garment measurements4
  • Nonconformance and corrective action7
  • Audits and findings3
  • Controlled documents and training3
Implementation

Roll out one team at a time

Start with one team and one process, then add the rest once the basics are running.

  1. Define the scope

    Choose Incoming, InProcess, Final or Service inspection work for the first cycle and agree subject reference conventions.

  2. Set the evidence rules

    Name required checks, fabric measurement units, garment points and tolerances, and the acceptance rule reviewers apply.

  3. Assign decisions

    Link People to Users and identify Inspector, Quality Reviewer, Quality Manager, Corrective Action Owner, Auditor and Document Coordinator.

  4. Prepare references

    Release controlled instructions, create the first audit scopes and identify acknowledgment recipients.

  5. Rehearse outcomes

    Run a passing case, a failed case, a correction plan and an independent effectiveness review.

Pricing

$0per user

The base account and everyday work in the ERP.AI app are free, for every user.

  • No per-user or per-seat fees
  • Viewing, editing, approving and exporting records in the app is free
  • Pay only for machine work: API calls, imports, workflows and AI agents
  • Prepaid credits from $5. Purchased credits never expire

Pricing details

Machine work rate card Included per $1

Machine work rate card
UsagePer $1
Record reads (list, filter, get)20,000
Search or aggregate queries4,000
Record writes4,000
Imported or synced records200,000
Workflow runs2,000
AI agent runs2,000
Scheduled jobs or webhooks20,000
File uploads (MB)2,000
CSV or PDF exports100
FAQ

Questions, answered

Scope, rollout and pricing for Textiles and Apparel QMS.

All questions
How do I get started?

Click Get started, then use Proto to configure QMS for Textiles and Apparel for your business. Start with one inspection type, its required checks, named inspector and reviewer, and a passing and failing rehearsal case.

Who decides whether an inspection passes?

Quality Reviewer reads the requirement checks and linked fabric or garment evidence, then accepts eligible passing scope or rejects failed scope.

How do fabric roll details reach review?

Inspector records roll number, style, inspected length, defect points, width and unit against the selected inspection. Submission sends that linked inspection to Review.

Can garment measurements be tied to the quality decision?

Yes. Each garment measurement links style, size, point, nominal, observed and tolerance to the inspection that receives the decision.

What happens when a check fails?

The reviewer rejects failed scope and opens a nonconformance linked to the inspection, with severity; the follow-up action names its owner.

Who approves a corrective action?

Quality Manager approves the planned action before implementation. An independent Quality Reviewer tests effectiveness before the action and linked case close.

When can an audit close?

Auditor closes the audit after every finding linked to it has been closed.

How are revised quality instructions handled?

Document Coordinator prepares a new version for Review. Quality Manager approves release, and earlier training acknowledgments remain tied to their documents.

Can we attach external test evidence?

Attach supporting evidence to the relevant inspection check and agree a connection for any external laboratory system your team uses.

Set up Textiles and Apparel QMS your way.

Start free, then use Proto to change fields, steps and approvals before your team goes live.

How to get started

A personal agent for your business

Get started with Proto

Your app is selected. Download Proto, then open it with this context.

Selected appQMS for Textiles and Apparel

Choose your computer’s platform.

Download Proto

Install Proto, then return to this panel.

Already installed? Open Proto

Free to use. Your own model provider may charge for usage.